RAM Tab-Tite Small Cradle Mount 7" Tablets Motorcycle Rail Handlebar U-Bolt

The RAM-B-149Z-TAB-SMU is a full kit that will allow you to mount a range of 7" tablets onto a handlebar rail.

The RAM-B-149Z-TAB-SMU consists of the following RAM (B Size) components:

• 1 x RAM Tab-Tite™ Cradle for 7" Screen Tablets (RAM-HOL-TAB-SMU)
• 1 x RAM 2.5" Round Base with AMPs Hole Pattern and 1" Ball (RAM-B-202U)
• 1 x Double Clamp Arm (Length of your choice - See below)
• 1 x U-Bolt Rail Base (RAM-B-231ZU)

RAM Tab-Tite™ Cradle for 7" Screen Tablets (RAM-HOL-TAB-SMU)

Get the most out of your tablet with the Universal RAM Tab-Tite™ cradle.

With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit.

This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go.

Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.

Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

Cradle Dimensions:

• Height: 7.3" minimum to 9.62" maximum
• Width: minimum width to 5.31" maximum
• Depth: 1.06" maximum

RAM Double Socket Clamp Arm (Select length prior to checkout);

• SHORT (RAM-B-201U-A) Overall Length: 6cm Socket-To-Socket Length: 4.5cm
• STANDARD (RAM-B-201U) Overall Length: 9cm Socket-To-Socket Length: 7.6cm
• LONG (RAM-B-201U-C) Overall Length: 15cm Socket-To-Socket Length: 13.5cm

RAM U-Bolt Rail Base (RAM-B-231ZU)

The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail.

The Zinc coated metal u-bolt accommodates rails in diameter from 1.27cm (0.5") to 3.18cm (1.25") in diameter.

Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".

** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Device shown for illustration purposes only and is not included in purchase.