RAM Mount ATV Roll Bar Rail Base with Diamond Adapter

RAM ATV V-ShapeD BASE WITH 1" BALL FOR RAILS AND YokeS

The RAM-B-108-238 consists of a 1" diameter rubber ball connected at a right angle to a V-Shaped base, STANDARD Double Clamp Arm and Diamond base adapter.

The RAM-B-108BU base accommodates rails from 1.0" to a maximum of 2.1" in diameter.

To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate.

Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail.

The RAM-B-108BU is an alternative mounting base for Beechcraft airplanes with a -throw over yoke

The RAM-B-108BU accommodates rails from 2.55 cm to a maximum of 5.3 cm in diameter.

Whats included

• 1 x 15.3 cm long metal strap
• 1 x 20.3 cm long metal strap
• 1 x 14 cm rubber strip to avoiding scratching or marking of the rail