RAM Mount Motorcycle Handlebar Rail Mount Universal X-Grip iPhone 6 7 8 X Samsung S8
SKU: RAM-B-149Z-UN7U-PReviews RAM-B-149Z-UN7U-P RAM Mount Motorcycle Handlebar Rail Mount Universal X-Grip iPhone 6 7 8 X Samsung S8 /assets/thumb/RAM-B-149Z-UN7U-P.jpg?1501501535 105.00
Add Something Extra
RAM Motorcycle Handlebar Rail U-Bolt Mount with Universal X-Grip for Phones
The Handlebar mount consists of the following RAM (B Size) components:
- 1 x RAM Universal X-Grip Phone Cradle
- 1 x RAM Double Clamp Arm (Length of your choice - See below)
- 1 x U-Bolt Rail Base with 1"" ball
Compatible Devices & Models
- iPhone 7, 6, 5, 5S, 5C, 4S
- Samsung galaxy S2 S3 S4 S5 S6 S7 with slim skin or shell
- Samsung Xperia Z and Z2
- HTC one M8
Not suitable for iPhone 6 Plus or Samsung Note Series.
1 x RAM Universal X-Grip iPhone Cradle
The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic.
Compatible and interchangeable with a wide range of popular RAM Mounting products.
The X-Grip includes a device tether recommended for outdoor applications.
The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case
- Minimum Width = 1.875"" (Minimum Height = 4.25"")
- Maximum Width = 3.25"" (Minimum Height = 2.25"")
- Depth = 0.875""
RAM Double Socket Clamp Arm (Select length prior to checkout)
- SHORT (RAM-B-201U-A) Overall Length: 6cm Socket-To-Socket Length: 4.5cm
- STANDARD (RAM-B-201U) Overall Length: 9cm Socket-To-Socket Length: 7.6cm
- LONG (RAM-B-201U-C) Overall Length: 15cm Socket-To-Socket Length: 13.5cm
RAM U-Bolt Rail Base with 1" ball
The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail.
The Zinc coated metal u-bolt accommodates rails in diameter from 1.27cm (0.5") to 3.18cm (1.25") in diameter.
Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Device shown for illustration purposes only and is not included in purchase. "
Great holder with awkward placing of grip handlesBy: Darylon 16 August 2018The installation of the holder was fairly easy, and the X-grip holds my phone well, even on bumpy terrains where my bike jumped a little, my phone didn't even budge from the grip. The provided rubber web also helps securing my phone. It stretches easily but does not become loose even after extended use time. The only problem to me was the placing of the grips. On some phones there is no problem whatsoever, but on my Samsung Galaxy S7 Edge, the upper arms would either press my volume button on the left, or press the power button on the right. Although possible for me to position the upper left arm in between volume up and down buttons, it just is a hassle to spend 10-20 seconds before taking off just to adjust the position of my phone. Other than that the mount works perfectly.