RAM Mount Motorcycle Handlebar Mount M8 Bolt GPS Garmin nuvi 2597

This a full kit that will allow you to mount Garmin nuvi GPS onto your motorcycle with a M8 threaded bolt.

---

What you get:

• 1 x RAM Cradle for the Garmin nuvi 2557LMT ,Garmin nuvi 2577LT and Garmin nuvi 2597LMT
• 1 x RAM Diamond Base with 1" Ball
• 1 x RAM Double Socket Clamp Arm (Select length prior to checkout);
• 1 x RAM Motorcycle Handlebar Clamp Base with M8 Screws

---

RAM Cradle for the Garmin nuvi 2557LMT ,Garmin nuvi 2577LT and Garmin nuvi 2597LMT

The RAM-HOL-GA57U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern.

Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle.

Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

---

Compatible Devices & Models

• Garmin nuvi2557LMT
• Garmi nuvi 2577LT
• Garmin nuvi 2597LMT

Not suitable for any other model of Garmin or GPS device.

---

RAM Double Socket Clamp Arm (Select length prior to checkout);

• SHORT (RAM-B-201U-A)        Overall Length: 6cm        Socket-To-Socket Length: 4.5cm
• STANDARD (RAM-B-201U)    Overall Length: 9cm        Socket-To-Socket Length: 7.6cm
• LONG (RAM-B-201U-C)          Overall Length: 15cm      Socket-To-Socket Length: 13.5cm

---

RAM Motorcycle Handlebar Clamp Base with M8 Screws (RAM-B-367U)

The RAM M8 mount has been designed specifically to replace one of the existing handlebar M8 threaded bolts.

Compatible with any Motorcycle using the M8 screws.

The M8 RAM-B-367U includes three sizes of M8 screws to match existing handlebar clamp boltS (55, 60 and 65 bolts) with a 1.25 thread pitch.

To fit this mount, simply remove one M8 screw from the handlebar and replace it with the hollowed rubber coated 1" ball and the M8 screw mounting system.

The RAM-B-367U mount includes the following male threaded screws:

• 1 x 1" Rubber ball
• 1 x M8 x 55 bolt (1.25 thread pitch)
• 1 x M8 x 60 bolt (1.25 thread pitch)
• 1 x M8 x 65 bolt (1.25 thread pitch)

---

 

** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Any device/s shown in image/s is for illustration purposes ONLY and is not included in purchase.