RAM iPad Air 2 Pro 9.7" Suction Mount Kit for Heavy Duty Cases

The RAM-B-166-TAB20U is a full kit that will allow you to mount an iPad Air 1 or 2 & Samsung Galaxy Tab A 9.7 (WITH CASE, SKIN OR SLEEVE) onto a suction-compatible surface.

The RAM-B-166-TAB20U consists of the following RAM (B Size) components:

• 1 x RAM Tab-Tite™ Cradle for Apple iPad Air 1-2 & Samsung Galaxy Tab A 9.7 WITH CASE, SKIN OR SLEEVE (RAM-HOL-TAB20U)
• 1 x RAM Diamond Base with 1" Ball (RAM-B-238U)
• 1 x Double Clamp Arm (Length of your choice - See below)
• 1 x RAM 3.3" Diameter Suction Cup Base with 1" Ball (RAM-B-224-1U)

RAM Tab-Tite™ Cradle for Apple iPad Air 1-2 & Samsung Galaxy Tab A 9.7 WITH CASE, SKIN OR SLEEVE (RAM-HOL-TAB20U)

Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle.

With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit.

This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go.

Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.

Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below.

It is important to verify the dimensions of your tablet when determining the overall size.

Cradle Dimensions:

• Height: 9.5" to 12.125"
• Width: 6.55" to 7.43"
• Depth: 0.3" to 0.875"

NOTE: The TAB20U Cradle is for iPad Air tablets that have a heavy duty case, skin or sleeve.

This kit is NOT suitable for iPad Air tablets WITHOUT a case, skin or sleeve - the cradle will be too big for the iPad Air on its own.

Please refer to our other RAM Mount solutions if you are looking for something similar and DO NOT have a skin, case or sleeve on your device.

RAM Double Socket Clamp Arm (Select length prior to checkout);

• SHORT (RAM-B-201U-A) Overall Length: 6cm Socket-To-Socket Length: 4.5cm
• STANDARD (RAM-B-201U) Overall Length: 9cm Socket-To-Socket Length: 7.6cm
• LONG (RAM-B-201U-C) Overall Length: 15cm Socket-To-Socket Length: 13.5cm

RAM 3.3" Diameter Suction Cup Base with 1" Ball (RAM-B-224-1U)

The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the RAM-B-238U (diamond base with 1" rubber ball).

The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for the best result, mount the suction cup on a glass or non-porous plastic surface.

** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Device shown for illustration purposes only and is not included in purchase.