RAM Mount Motorcycle Brake/Clutch Reservoir Base with 2 x 1" Balls

The RAM-B-309-2U connects to your handlebar clutch/brake clamp (left or right side) and has two 1" diameter mounting balls for attaching up to two devices.

---

What you get:

• 1 x RAM Motorcycle Brake/Clutch Reservoir Base with 2 (Qty) 1" Balls (RAM-B-309-2U)

Note: This listing does NOT include a RAM cradle or Double Clamp Arm, these items will need to be purchased separately.

---

RAM Motorcycle Brake/Clutch Reservoir Base with 2 (Qty) 1" Balls (RAM-B-309-2U)

The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" diameter mounting ball.

The ball that is connected between the hole centers is removable.

The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit.

To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir.

The holes centers have a minimum width of 0.94" and a maximum of 1.58".

---

* Any device/s shown in image/s is for illustration purposes ONLY and is not included in purchase.