RAM Garmin GPS Oregon 200 - 600 Series Vehicle Suction Cup Mount

The RAM-B-166-GA31U is a full kit that will allow you to mount a range of compatible Garmin GPS devices (without a case, skin or sleeve) onto a suction-compatible surface.

The RAM-B-166-GA31U consists of a 3.3" diameter suction cup twist lock base, double socket arm and high strength composite cradle.

The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces.

Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the mount to your optimum viewing position.

The RAM-B-166-GA31U consists of the following RAM (B Size) components:

• 1 x RAM Cradle for the Garmin Approach G5, Oregon 200, 300, 400, 450, 550, 600 & 650 (RAM-HOL-GA31U)
• 1 x RAM Diamond Base with 1" Ball (RAM-B-238U)
• 1 x Double Clamp Arm (Length of your choice - See below)
• 1 x RAM 3.3" Diameter Suction Cup Base with 1" Ball (RAM-B-224-1U)

Compatible Devices & Models

• Garmin Approach G5
• Garmin Oregon 200, 300, 400, 450, 550, 600 & 650

Not suitable for any other models of GPS or device.

RAM Cradle for the Garmin Approach G5, Oregon 200, 300, 400, 450, 550, 600 & 650 (RAM-HOL-GA31U)

The RAM-HOL-GA31U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern.

Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle.

Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

Not suitable for compatible devices with any form of case, skin, sleeve or cover.

RAM Double Socket Clamp Arm (Select length prior to checkout);

• SHORT (RAM-B-201U-A) Overall Length: 6cm Socket-To-Socket Length: 4.5cm
• STANDARD (RAM-B-201U) Overall Length: 9cm Socket-To-Socket Length: 7.6cm
• LONG (RAM-B-201U-C) Overall Length: 15cm Socket-To-Socket Length: 13.5cm

RAM 3.3" Diameter Suction Cup Base with 1" Ball (RAM-B-224-1U)

The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the RAM-B-238U (diamond base with 1" rubber ball).

The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for the best result, mount the suction cup on a glass or non-porous plastic surface.

** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Device shown for illustration purposes only and is not included in purchase.