The RAM-B-121-TAB12U iPad Mini 1- 4 cradle with Yoke clamp mount for a handlebar or rail.
The RAM-B-121-TAB12U consists of the following RAM (B Size) components:
- 1 x RAM TAB TITE Cradle for iPad MINI 1 - 4 with a case, or skin
- 1 x RAM 2.5" Round Base with AMPs Hole Pattern and 1" Ball
- 1 x RAM Double Clamp Arm
- 1 x RAM Yoke Clamp Base with 1" Rubber Ball
RAM Tab-Tite™ Universal Cradle for the iPad Mini 1-4 WITH CASE, SKIN OR SLEEVE
The IPAD MINI CRADLE consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case.
The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go.
Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below.
- Height: 7.125" to 9.5"
- Width: 5.06" to 5.68"
- Depth: 0.13" to 1"
May not be suitable for some tablet models or devices - please check dimensions first.
RAM Double Socket Clamp Arm
- STANDARD (RAM-B-201U) Overall Length: 9cm Socket-To-Socket Length: 7.6cm
RAM Yoke Clamp Base with 1" Rubber Ball
The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25".
The 1" rubber ball is at a RIGHT angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail.
Clamp Base Dimensions:
- Accommodates rails from 0.625" to 1.25" in diameter.
* Any device shown is for illustration purposes only and is not included in purchase.
Be The First To Review This Product!
Help other Mr Mobile (Aust) Pty Ltd users shop smarter by writing reviews for products you have purchased.