RAM Mount Double Socket Arm 1" to 1.5" Size Ball

RAM Mount Composite Swivel Double Socket Arm for 1" and 1.5" Size Balls

This RAM component will allow you to attach a 1" (B Size) RAM ball to a 1.5" (C Size) RAM ball.

---

This listing consists of the following RAM component/s:

• 1 x RAM® Mount Composite Standard Arm with 1" and 1.5" socket

Note: This listing does NOT include a RAM cradle, this item will need to be purchased separately, depending on your requirements.

---

RAM® Mount Plastic Standard Arm with 1" and 1.5" socket

The high strength double socket arm has a 1.5" diameter ball socket on one end and a 1" socket at the other.

This combination arm allows a 1.5" diameter ball accessories to be connected at one end and the other end has a socket for a 1.0" dia ball accessory.

A tightening screw on the side of both arms enables the sockets to clamp firmly to the rubber ball accessories.

When loosening the side screw on either arm, the corresponding ball easily removes from the socket if required.

Three part connect together to form the RAP201-BC. There is a separate tightening bolt for each socket allowing you to adjust positioning more accurately and securely.

It consists of a 1" diameter and 1.5" diameter socket and button socket arm, joined together with a plastic double button connector.

This center joint allows you to twist the arm at the center. This will enable the sockets to be set at 90 degrees to each other.

---

* Any device/s shown are for illustration purposes ONLY and are NOT included in purchase.